Your kids and pets stay in your yard, not wandering into the street or the neighbor’s pool. That’s the baseline.
Beyond that, you get actual privacy from the road and neighboring properties. No more awkward eye contact while you’re grilling on a Sunday. No headlights cutting through your living room at night.
A wood privacy fence in Orlando also means your property line is clearly defined. That matters when it’s time to sell, and it matters now if you’ve got neighbors who like to creep their storage or landscaping onto your side. You’ll know exactly where your property ends.
And if you’re dealing with an HOA, a well-built wood fence usually checks their boxes without the premium cost of vinyl or aluminum. It’s classic, it’s functional, and it doesn’t look like you’re trying too hard.
We started in Atlanta building custom wood fences for residential properties. After twelve years there, we expanded into Central Florida and haven’t looked back.
We’re licensed, bonded, and insured in Florida. That’s not a given with every fence company you’ll find online. We handle permits, file the Notice of Commencement, and make sure your installation doesn’t turn into a code violation or an HOA nightmare.
Orlando homeowners deal with specific challenges: hurricane wind loads, sandy soil conditions, high water tables in some neighborhoods, and HOA rules that vary wildly from Lake Nona to Baldwin Park to Winter Park. We’ve worked in all of them. We know what passes inspection and what gets flagged.
You reach out, and we schedule a time to walk your property. We’ll measure the area, check for utilities, talk about height restrictions, and go over design options that fit your goals and your budget.
Once you approve the estimate, we pull the permits. In Orlando, that means working with the city or county depending on where you’re located. We handle that paperwork so you don’t have to figure out setback requirements or wind load specs.
Installation typically takes two days for a standard residential project, assuming the weather cooperates. We set posts in concrete, let them cure, then install rails and boards on-site. Everything is built where it’s going to live, not pre-assembled in a warehouse.
After installation, we walk the fence line with you to make sure everything meets your expectations. You’ll get care instructions for pressure treated wood, which mostly comes down to letting it dry before staining and keeping vegetation from piling up against the boards.
Ready to get started?
We use pressure treated pine for posts, rails, and boards. That’s the material that actually holds up in Orlando’s climate without rotting out in three years. You’re looking at 15 to 20 years of life with basic maintenance.
Posts go into the ground with concrete footings. In areas with sandy soil or high water tables, we adjust the depth and mix to make sure your fence doesn’t lean after the first heavy rain. That’s a common issue with rushed installations, and it’s expensive to fix after the fact.
You’ll get options for board styles: solid privacy, shadowbox for airflow, or spaced picket if you want visibility with boundaries. Shadowbox is popular in Orlando because it handles wind better during storms. Solid panels act like sails in a hurricane, and that’s when you see fences in the street.
We also coordinate around your irrigation, landscaping, and any existing structures. If you’ve got a pool cage, a shed, or a deck that ties into the fence line, we plan for that upfront. No surprises halfway through the job.
Yes, you need a permit for most wood fence installations in Orlando. The city requires permits for fences over a certain height, and the rules vary depending on whether you’re in city limits or unincorporated Orange County.
If you’re in an HOA, you’ll also need architectural approval before you apply for the permit. Some HOAs require specific styles, colors, or heights. Skipping that step means you could install the fence and then be forced to tear it down or modify it.
We handle the permit process as part of your installation. That includes confirming property lines, checking setback requirements, and making sure your fence meets wind load standards for Central Florida. It’s one less thing you have to track down at a city office or figure out online.
Pressure treated wood lasts 15 to 20 years in Florida if it’s installed correctly and maintained. The key is letting the wood dry after installation before you stain or seal it. Wet wood won’t absorb treatment, and you’ll end up with peeling and uneven coverage.
Florida’s humidity, rain, and UV exposure are harder on wood than in most other states. You’ll see faster wear if the fence sits in standing water, if vegetation grows against it, or if it’s installed in full sun without any protective finish.
Regular maintenance means cleaning the fence once a year and reapplying stain or sealant every two to three years. That’s what keeps the wood from graying out, cracking, or becoming a target for termites. If you skip maintenance, you’re looking at replacement closer to the ten-year mark instead of twenty.
Shadowbox and spaced-board styles hold up better in hurricanes than solid privacy panels. Solid wood acts like a sail when wind hits it, and that’s when you see entire sections ripped out of the ground or snapped at the posts.
Shadowbox fencing has boards on both sides of the rails with gaps that allow wind to pass through. You still get privacy from most angles, but the fence doesn’t catch wind the same way. It’s a smarter design for Central Florida, where tropical storms and hurricanes are a regular threat.
Post depth and concrete footings also matter. We set posts deeper in areas prone to flooding or high winds, and we use concrete mixes designed for Florida soil conditions. A fence is only as strong as what’s holding it in the ground, and that’s where a lot of cheaper installations fail during storm season.
You can install a wood fence on your property line in Orlando, but you need to confirm exactly where that line is before you start. Installing even a few inches onto your neighbor’s property can lead to legal disputes and forced removal.
A survey is the safest way to confirm boundaries. If you don’t have a recent survey, you can hire a surveyor or check with your title company to see if one was done when you bought the property. Some neighborhoods have plats on file with the county that show lot lines, but those aren’t always accurate on the ground.
You should also talk to your neighbor before installation, even if you’re staying on your side of the line. Florida law doesn’t require their permission if the fence is entirely on your property, but it’s a lot easier to avoid conflict upfront than deal with complaints after the posts are set.
Pressure treated wood fence installation in Orlando typically costs $20 to $30 per linear foot. That includes materials, labor, and standard post installation with concrete footings.
The final price depends on fence height, style, property conditions, and whether you need gates or custom features. A six-foot privacy fence costs more than a four-foot picket fence. Shadowbox costs more than a basic solid board design because of the extra labor.
If your property has slopes, obstacles, or difficult access, that can add to the cost. Same with permit fees, HOA requirements, or utility location services. We give you a full breakdown in the estimate so you know what you’re paying for and why. No line items that show up later as surprises.
Your wood fence needs cleaning, inspection, and refinishing to last its full lifespan in Orlando. Once a year, spray it down to remove dirt, mildew, and pollen. Florida’s humidity creates the perfect environment for mold growth, especially on north-facing sections that don’t get much sun.
Every two to three years, you’ll want to restain or reseal the wood. This protects it from UV damage, moisture, and insects. If you see the wood turning gray or the finish peeling, it’s time to reapply. Skipping this step means the wood dries out, cracks, and becomes vulnerable to termites.
You should also check for loose boards, rusted nails, or posts that are starting to lean. Catching small issues early prevents bigger repairs later. If you’ve got sprinklers near the fence, make sure they’re not soaking the boards every time they run. Constant moisture is the fastest way to rot out a wood fence in Florida.
Local Resources
Other Services we provide in City Of Orlando/Goaa
