If you live in Lake Nona, Horizon West, Avalon Park, or any of Orange County’s heavily HOA-governed communities, you already know the fence process isn’t straightforward. You need HOA architectural approval before installation begins. You need a permit through Orange County’s Fast Track Online Services portal and that permit requires a survey showing exactly where the fence will sit. Get either step wrong and you’re either tearing it out or modifying it at your own expense.
Aluminum fencing is the material most HOA architectural committees in Orange County approve and for good reason. The ornamental styling, clean powder-coat finish, and consistent appearance check the boxes that wood and vinyl often don’t. Beyond aesthetics, aluminum performs in ways that matter here. Orange County sees intense UV year-round, daily humidity, and real wind events. Hurricane Milton made landfall in October 2024, and Orange County homeowners felt the impact across the region. Aluminum’s open picket design lets wind pass through rather than catching it like a sail, and when a section takes damage, modular panels mean you replace that section not the whole fence.
What you end up with is a fence that looks sharp, satisfies your HOA, passes county inspection, and requires nothing from you after installation. No repainting. No rotted boards. No rust. Just a fence that does its job.
We’ve been in the fencing business since 1992 starting in Metro Atlanta, building a reputation for quality custom work, and then bringing that same operation to Central Florida in 2004 when we saw a market that needed a contractor who actually knew what they were doing. That’s over two decades of navigating Orange County’s permit office, understanding what HOA committees in communities like Dr. Phillips and MetroWest are looking for, and installing aluminum fencing that holds up against Florida’s climate.
Our Orlando office sits right on North Orange Blossom Trail US 441 which means when you call, you’re talking to people who work in Orange County, not a call center routing jobs from across the state. We were recognized in Orlando Magazine’s 2025 Home Design Awards, which is about as local a credibility signal as it gets in this market. Financing is available for any project size, and every installation comes with a free consultation so you know exactly what you’re getting before anything is signed.
It starts with a free consultation. Someone from our team comes out, looks at your property, talks through what you need whether that’s a pool barrier that meets Orange County’s specific code requirements, a fence that matches your HOA’s approved styles and colors, or a full perimeter installation on a new home in Horizon West and gives you a clear picture of what the job involves before any money changes hands.
Once you move forward, we handle the permit process. In Orange County, that means submitting through the Fast Track Online Services portal with a survey showing the fence location, and routing the application through the Zoning Division for compliance review under Chapter 38 of the county’s land development regulations. If your HOA requires architectural approval before installation, we coordinate that too. Utility lines get marked before any digging starts that’s a legal requirement, not an afterthought.
Posts go in with concrete appropriate for Central Florida’s sandy soil, which shifts and settles differently than denser northern soil. Panels are set level, gates are hung and tested, and the site gets cleaned up before our crew leaves. After installation, you get a walk-through to confirm everything looks right and functions the way it should. If there’s a gate latch to adjust or a panel to align, that happens before the job is considered done.
Ready to get started?
Our aluminum fence installation covers the full scope not just the panels and posts. That means the Orange County permit application, the survey coordination, the HOA submission if your community requires it, and the inspection scheduling. For pool fences specifically, we install to meet Florida Building Code 8th Edition Residential requirements under Florida Statute 515: minimum 48-inch barrier height on the access side, no openings larger than 4 inches, self-closing and self-latching gates that open away from the pool, and latches positioned at 54 inches or higher. These aren’t details you have to track down and verify they’re built into how we do the job.
The aluminum itself is finished with a factory-applied powder coat baked on, not painted in the field which resists Orange County’s UV intensity, humidity, and the chlorine-saturated air around pool enclosures without fading or peeling. Styles range from standard residential picket to ornamental spear-top configurations that satisfy most HOA architectural standards in communities from Baldwin Park to Avalon Park. We also offer commercial aluminum fencing for property owners and businesses across the county.
Special financing is available for any project size, which matters when you’re looking at a full perimeter installation on a larger Orange County lot. The free quote is straightforward no pressure, no obligation, just a clear number so you can make an informed decision.
Yes and this is one of the most important things to understand before you hire anyone. Orange County requires a permit for every fence installation, including repairs and restorations. That’s more stringent than many surrounding counties. The application goes through Orange County’s Fast Track Online Services portal, and it requires a survey showing the location of the proposed fence on your property. The Zoning Division reviews every residential application for compliance with Chapter 38 of the county’s land development regulations before approval is granted.
Skipping the permit isn’t just a technicality. If you install without one and a neighbor reports it, or it comes up during a home sale, you could be required to remove or modify the fence entirely. We handle the Orange County permit application as part of the installation process, including the survey coordination and submission, so you’re not left navigating the Fast Track system on your own.
Orange County requires pool barriers to comply with Florida Building Code 8th Edition Residential (2023) and Florida Statute 515. The barrier must be at least 48 inches tall measured on the access side, with no openings that allow a 4-inch sphere to pass through. Gates must be self-closing and self-latching, must open away from the pool, and the latch must be positioned at 54 inches or higher so it’s out of reach for young children. No climbable horizontal members are permitted on the outside of the barrier within 45 inches of the top.
Orange County also requires a completed Swimming Pool Safety Affirmation form identifying the specific barrier type and specifications, submitted as part of the pool permit application through Fast Track. A pool barrier that fails inspection means the pool can’t be used until corrections are made and corrections after the fact cost more than getting it right the first time. Aluminum fencing is the most commonly used material for pool barriers in Orange County because its open picket design naturally avoids the climbable horizontal member issue that causes other fence types to fail inspection.
In most cases, yes aluminum is actually the fence material HOA architectural committees in communities like Lake Nona, Horizon West, Avalon Park, and MetroWest are most likely to approve. These communities tend to restrict or prohibit wood fences entirely due to maintenance concerns, and solid-panel vinyl fencing is often limited to rear yards only. Ornamental aluminum in black, bronze, or white powder-coat finishes with spear-top styling is the configuration that fits most HOA aesthetic standards in Orange County’s master-planned communities.
That said, every HOA has its own specific requirements for height, color, style, and placement and you need written architectural approval before installation begins. If the fence goes in without that approval, you’re at risk of a violation notice and mandatory modification. We’ve worked with HOA communities across Orange County and can help you identify the right configuration for your community’s standards and prepare the documentation the committee needs to review your request.
Aluminum handles wind events better than most people expect, and better than the alternatives. The open picket design is the key wind passes through the gaps rather than pushing against a solid surface the way it does with a wood privacy fence or a vinyl panel fence. That reduced wind resistance means less pressure on the posts during a storm, which is why aluminum fences tend to stay standing when solid-panel fences in the same neighborhood come down.
Hurricane Milton hit Orange County in October 2024, and the county activated FEMA Individual Assistance programs for storm-damaged properties. Many of the fence replacements that followed were homeowners upgrading from wood or vinyl to aluminum specifically because of how the comparison played out. When aluminum does take damage, the modular panel design works in your favor you replace the damaged section, not the entire fence. That’s a meaningful cost difference when you’re dealing with storm repairs. Powder-coat finish also holds up better than painted surfaces against the UV and humidity that follow a storm event.
The physical installation itself is typically completed in one to two days for a standard residential project, depending on the size of the property and the number of gates. What adds time to the overall timeline is the front end the Orange County permit application, Zoning Division review, and HOA architectural approval if your community requires it. These steps are necessary, and skipping them creates bigger problems down the road, but they do mean the project doesn’t start the day after you sign.
In communities like Horizon West and Lake Nona where new homeowners sometimes face HOA post-closing deadlines to complete landscaping and fencing typically within 90 to 180 days of closing it’s worth starting the process early rather than waiting until you’re close to the deadline. We initiate the permit and HOA submission process as soon as the project is confirmed, which keeps the timeline moving while the approvals work their way through. Getting the consultation scheduled early gives you the most flexibility.
It’s one of the best choices for those properties specifically. Orange County has over 1,000 named freshwater lakes, and a significant number of residential properties back up to lakes, canals, or retention ponds. That waterfront environment persistent humidity, frequent moisture exposure, and the kind of air that accelerates rust on ferrous metals is exactly where aluminum outperforms wrought iron and where wood degrades fastest. Aluminum doesn’t rust, and the factory-applied powder-coat finish resists the corrosion that iron develops in Florida’s climate without any ongoing treatment or repainting.
For waterfront properties where the fence is also serving as a safety barrier near the water’s edge, aluminum’s open picket design maintains visibility while still defining the boundary clearly which matters for both safety and the view you paid for. If your property is also subject to HOA requirements or Orange County setback rules near a waterway, those factors get reviewed as part of the permit process. We handle that review as part of the job, so the fence goes in correctly relative to your property line and any applicable setback requirements.
Local Resources
