You get a fence that doesn’t rot, rust, or require weekend projects. That’s the reality of aluminum fencing in Pershing, FL.
Wood needs staining every few years or it falls apart. Iron rusts out in Florida’s humidity. Aluminum just sits there, doing its job, looking clean.
Most aluminum fences last 50+ years with nothing more than an occasional spray from your garden hose. No scraping, no painting, no replacing boards that warped in the rain. You install it once and forget about it.
If you have a pool, you need code-compliant fencing that meets BOCA standards—54 inches high, proper gate latches, correct rail spacing. Aluminum handles that without looking like a cage. It keeps kids safe, meets inspection requirements, and doesn’t block your view of the yard.
And if your HOA has opinions about what your fence should look like, aluminum comes in multiple colors and styles. Black, bronze, white. Decorative or simple. It fits in without looking cheap.
We’ve been working in Central Florida for over 30 years. We know what holds up here and what doesn’t.
Pershing sits in Volusia County, where the weather swings from torrential summer storms to dry winter stretches, with humidity that never really quits. Fences take a beating. We’ve seen every type of fence fail in Florida, and we’ve learned what actually works.
Aluminum works. We install it correctly, pull the permits, handle inspections, and make sure it meets local codes. You don’t have to chase down contractors or worry about whether it’s done right.
We’re licensed, bonded, and insured. We’ve been recognized in Orlando Magazine’s Home Design Awards. But more than that, we show up when we say we will, finish the job without dragging it out, and don’t surprise you with hidden costs after the fact.
First, we come out to your property in Pershing and take measurements. We talk about what you need—pool fencing, property line definition, security, whatever it is. We look at your yard, check for underground utilities, and figure out the layout.
Then we give you a quote. No games, no “call for pricing.” You know what it costs before we start.
Once you’re ready to move forward, we pull the permits. Volusia County has specific requirements for setbacks and fence height, and if you’re in an HOA, there are usually more rules on top of that. We handle that paperwork so you don’t have to sit on hold with the county.
Installation usually takes one to three days depending on the size of your property. We set posts, level the panels, install gates with proper latches, and clean up when we’re done. Aluminum is lighter than iron, so the process moves quickly without tearing up your yard.
After installation, we walk the fence line with you to make sure everything looks right and functions the way it should. Then we schedule the final inspection if one’s required. That’s it.
Ready to get started?
When you hire us for aluminum fence installation in Pershing, FL, you’re getting professional-grade materials that won’t corrode in Florida’s climate. We use powder-coated aluminum that resists fading, chipping, and rust. The coating is baked on, not painted over, so it lasts.
You’re also getting proper installation. Posts are set in concrete and spaced correctly so the fence doesn’t sag or lean over time. Gates are hung level with self-closing hinges and latches that meet pool code if needed. Rails are secured so they don’t rattle loose in windstorms.
We include all permits and inspections in our service. Volusia County requires permits for most fence installations, and if you skip that step, you can end up with fines or forced removal. We make sure everything is filed correctly and passes inspection the first time.
Customization is part of the package too. You pick the height, color, and style that works for your property. If you need decorative caps or specific gate configurations, we handle that. If your yard has slopes or obstacles, we adjust the design to fit.
And because Pershing is part of the greater Central Florida area we’ve served for decades, we understand local soil conditions, water table issues, and how to install fencing that holds up when the ground shifts or floods during hurricane season. That kind of local knowledge matters when you’re putting something permanent in the ground.
Aluminum fences regularly last 50 years or more in Florida, and many homeowners never replace them. The material doesn’t rust like iron or rot like wood, so humidity and rain don’t break it down.
The powder-coated finish protects against UV damage and salt air, which is important in Central Florida even if you’re not directly on the coast. Pershing gets enough moisture and temperature swings that cheaper materials degrade fast. Aluminum handles it without much maintenance.
You’ll need to rinse it off occasionally to remove dirt and pollen, but that’s about it. No sanding, no sealing, no repainting. The fence you install today will look nearly the same in 20 years.
Yes, when it’s installed correctly. Florida law requires pool barriers to be at least 48 inches high, though most installers go with 54 inches to meet BOCA standards, which are stricter and more widely recognized.
The fence also needs to have gaps between pickets that are narrow enough to prevent a child from squeezing through—typically no more than 4 inches. Gates must have self-closing hinges and self-latching mechanisms that are out of reach of small children.
We install aluminum pool fences in Pershing that meet all of these requirements. We handle the permit process and make sure the installation passes inspection. If your fence doesn’t meet code, you can be fined or required to tear it out and start over, so it’s worth doing right the first time.
Most residential aluminum fence projects in Pershing run between $25 and $45 per linear foot, depending on height, style, and site conditions. A typical 100-foot fence costs somewhere between $2,500 and $4,500 in materials and labor.
That’s more than chain link and usually more than basic wood, but it’s less than wrought iron and comparable to quality vinyl. The difference is that aluminum doesn’t need ongoing maintenance or replacement, so the long-term cost is lower.
If your yard has slopes, rocky soil, or requires extra gates, that can add to the cost. Same with decorative styles or custom colors. We give you a detailed quote upfront so there are no surprises. You’ll know exactly what you’re paying before we start the work.
Aluminum fencing holds up well in high winds when it’s installed properly. The picket design allows wind to pass through rather than catching it like a solid panel would, which reduces the force on the posts.
The key is proper installation. Posts need to be set deep enough in concrete and spaced correctly. If the posts are too shallow or too far apart, the fence can fail in a storm. We set posts according to local building codes and account for Volusia County’s soil conditions, which can be sandy or prone to shifting.
Aluminum is also lighter than iron, so even if a section does get damaged in a hurricane, it’s less likely to cause secondary damage to your home or vehicles. And because the material doesn’t rust, even if it gets bent or knocked over, it won’t corrode while you’re waiting for repairs.
Aluminum and wrought iron look similar, but aluminum doesn’t rust and weighs a lot less. That makes it easier to install and better suited for Florida’s humid, rainy climate.
Wrought iron is stronger, so if you need a fence that can take serious impact—like around livestock or heavy equipment—iron might be the better choice. But for residential properties in Pershing, aluminum gives you the same look without the maintenance headaches.
Iron fences need to be repainted every few years to prevent rust, especially in Florida. Even with regular maintenance, they eventually corrode. Aluminum’s powder-coated finish lasts decades without touch-ups. For most homeowners, that trade-off makes aluminum the smarter pick.
Most residential aluminum fence installations in Pershing take one to three days, depending on the size of your property and how many gates you need. Smaller yards with straightforward layouts can be done in a day. Larger properties or ones with slopes and obstacles take longer.
Aluminum is lighter than iron or wood, so the installation process moves faster. We don’t need heavy equipment to move materials around, and the panels go up quickly once the posts are set.
The timeline also depends on permits and inspections. Volusia County requires permits for most fence installations, and there’s usually a waiting period before work can start. We handle that process for you and schedule the work as soon as permits are approved. Once we start, we finish the job without dragging it out or leaving your yard torn up for weeks.
Local Resources
Other Services we provide in Pershing
