You’re not repainting every few years. You’re not replacing rotted posts or dealing with rust stains on your driveway. Your residential aluminum fence in Union Park looks the same in year ten as it did the day it went up.
That’s what happens when the material is built for Florida’s climate instead of just tolerating it. Aluminum doesn’t rust, warp, or fade under UV exposure the way wood and cheaper metals do. The powder coating we use is tested to over 4,000 hours in salt spray conditions—twice what’s required.
You get a fence that adds value to your property without adding tasks to your weekend. No staining, no sealing, no scraping. If it gets dirty, hit it with a garden hose. That’s the maintenance plan.
And if you’re in an HOA community, aluminum checks the box. It looks clean, stays clean, and doesn’t become the eyesore that gets you a violation letter three years in.
We’ve been operating in Central Florida since 2004, with roots going back to 1992 in Atlanta. We’re licensed, bonded, and insured—not because it sounds good in a sentence, but because it protects you if something goes sideways.
Union Park sits in a part of Central Florida where the weather doesn’t mess around. High humidity, afternoon storms, and enough sun to fade just about anything. We’ve installed thousands of feet of aluminum fencing in Union Park and across Orange County, so we know what holds up and what doesn’t.
We don’t use cheap fasteners or cut corners on installation. You’re getting the same materials and methods we’d use on our own properties. Transparent pricing, no surprise fees, and a team that shows up when we say we will.
First, we come out to your property in Union Park and take measurements. We’ll talk about what you’re trying to accomplish—pool safety, privacy, curb appeal, HOA compliance—and recommend styles and heights that make sense. If there are permit requirements or HOA approvals needed, we handle that paperwork.
Once you approve the quote, we schedule the install. Aluminum is lighter than steel or wrought iron, so the installation moves faster without sacrificing strength. We set the posts, level the panels, and make sure gates swing smooth and latch tight. If you’ve got a pool, we’ll install it to BOCA code height with the proper spacing and self-closing gate hardware.
After the install, we walk the fence line with you to make sure everything meets your expectations. Then we clean up and leave you with a fence that’s ready to go. No curing time, no waiting for paint to dry. It’s done.
You’ll get care instructions, but honestly, there’s not much to it. Rinse it off when it gets dusty. That’s about it.
Ready to get started?
Every custom aluminum fence in Union Park, FL starts with commercial-grade materials. We’re talking 5/8″ square pickets for residential installs and 3/4″ thick pickets for commercial jobs that can’t be bent by hand. Rails are reinforced, and the powder coating is factory-applied so it doesn’t chip or scratch like field-painted finishes.
You’ll choose from styles like Close Space Picket, Alternating Spear Top, or Staggered Spear Top. Colors include black, bronze, and white—all designed to resist fading under Florida’s intense sun. Heights range from 36″ up to 72″, with 54″ available for pool code compliance.
Union Park properties often deal with sandy soil and high water tables, so we adjust post depth and use concrete footings sized for your specific ground conditions. If you’re near one of the lakes in the area, we account for moisture and drainage so your fence doesn’t shift or settle over time.
Gates come with self-closing hinges and keyable locks if you need them. We can also add decorative post caps, finials, or puppy picket sections for smaller pets. Everything is customizable, but it all starts with the same durable foundation that’s made to last decades, not years.
Aluminum fences regularly last 50 years or more in Union Park, FL, and that’s with minimal maintenance. The material doesn’t rust, so humidity and rain aren’t threats the way they are with steel or iron. The powder coating protects against UV damage, which is critical here since Central Florida gets some of the highest sun exposure in the country.
You’re not dealing with wood rot, termite damage, or the warping that happens with vinyl in extreme heat. Aluminum stays stable. The fasteners and hardware we use are stainless steel or coated to prevent corrosion, so you won’t see loose pickets or sagging sections a few years down the line.
If you take care of it—which really just means rinsing it off occasionally—there’s no reason it shouldn’t outlast your time in the home. Most homeowners never replace an aluminum fence. They might upgrade the style or add a section, but the original install keeps doing its job.
Aluminum fencing is lighter than steel, but that actually works in your favor during high winds. The picket design allows wind to pass through instead of creating a solid barrier that catches gusts like a sail. That reduces the load on the posts and makes the whole structure more stable in storms.
We install posts deep enough to handle Central Florida wind loads, and we use concrete footings sized for your soil type. Union Park can see sustained winds during hurricane season, so proper installation matters. Cheap installs with shallow posts or undersized footings are the ones that fail when a storm rolls through.
Aluminum won’t crack or splinter like wood, and it won’t become brittle like some plastics do after years of sun exposure. If a branch comes down on it, you might get a bent picket, but the fence isn’t going to shatter or collapse. Most storm damage we see is repairable without replacing entire sections.
Yes, most aluminum fence installations in Union Park, FL require a permit through Orange County. The requirements depend on the height and location of the fence, especially if it’s near a property line or around a pool. Pool fences have specific code requirements for height, spacing, and gate hardware that have to be met before the county will approve the permit.
We handle the permit process as part of the installation. That includes submitting the site plan, ensuring the fence meets setback requirements, and scheduling inspections if needed. If you’re in an HOA community, you’ll also need approval from the association before we can start work.
The permit process usually takes a week or two, depending on the county’s workload. We don’t start the install until everything is approved, because the last thing you want is a code violation or an order to remove a fence that wasn’t permitted correctly. It’s worth doing it right the first time.
Aluminum fences in Union Park typically run between $25 and $45 per linear foot installed, depending on height and style. That’s more expensive upfront than chain link, but it’s comparable to quality wood or vinyl—and it lasts longer than both without the maintenance costs.
Wood fences need staining or painting every few years, and you’ll likely replace rotted boards or posts within a decade. Vinyl can crack in Florida’s heat and doesn’t handle impacts well. Aluminum gives you 50+ years of use with almost zero upkeep, so the long-term cost is actually lower when you factor in repairs and replacements.
If you’re installing a pool fence, aluminum is often the most cost-effective option that also meets safety codes and looks good. You’re getting a 50-70% return on investment when it comes to property value, and you’re not spending weekends maintaining it. The math works out better than cheaper materials that nickel-and-dime you over time.
Most HOAs in Union Park and the surrounding Orange County area approve aluminum fencing because it’s clean, consistent, and doesn’t deteriorate visually over time. We’ve worked with dozens of HOA communities in Central Florida, so we know what associations typically require in terms of style, color, and height.
Before we start, we’ll review your HOA’s guidelines and make sure the fence design meets their standards. That usually means specific colors—black, bronze, or white are the most common—and certain styles that fit the neighborhood aesthetic. We’ll submit the design for approval if your HOA requires it, and we won’t move forward until you have written approval.
If your HOA has rejected fence proposals in the past, we can help you understand why and recommend options that are more likely to get approved. The goal is to install a fence that adds value to your property without putting you in conflict with the association or risking a forced removal.
Almost none. You’ll rinse it with a garden hose a few times a year to remove pollen, dust, or dirt. That’s it. No painting, no staining, no sealing, no sanding. The powder coating is baked on at the factory, so it doesn’t chip or peel the way field-applied paint does.
If you live near a lake or in an area with a lot of oak trees, you might rinse it more often just to keep it looking sharp. But even if you skip a few months, the fence isn’t going to degrade. Aluminum doesn’t rust, so water and humidity aren’t problems. It doesn’t rot, so you’re not replacing boards. It doesn’t warp, so gates stay aligned and pickets stay straight.
The hardware—hinges, latches, post caps—might need a drop of lubricant every couple of years if you want gates to swing smoothly. But that’s optional, not required. Most homeowners in Union Park spend less than an hour a year on aluminum fence maintenance, and that’s if they’re being thorough.
Local Resources
