Your property line is clear. Your kids and pets have a safe space to play without you watching the gate every second. Your backyard actually feels private again.
The fence looks clean, sits level, and doesn’t shake when you test the posts. No gaps at the bottom where your dog can squeeze through. No wobbly sections that’ll need fixing next year.
You’re not calling us back in six months because the wood’s already warping or the vinyl’s cracking. It’s installed correctly the first time, with materials that can handle Central Florida’s heat, humidity, and storms. That’s the difference between a fencing company in Edgewood, FL that knows what they’re doing and one that’s just trying to get the job done fast.
Mossy Oak Fence LLC started in Atlanta over 30 years ago, moved to Central Florida in 2004, and has been serving Edgewood and the surrounding counties ever since. We’re licensed, bonded, and insured, which matters more than most people realize until something goes wrong.
We’re not the cheapest option in Edgewood, FL, and we don’t try to be. You’re paying for materials that last and installation that meets Florida building codes, including wind load requirements that actually matter during hurricane season.
We’ve seen what happens when fences are installed wrong or with bottom-tier materials. You end up paying twice. Our job is to make sure you don’t.
First, we come out to your property in Edgewood, FL and walk the line with you. We talk about what you’re trying to accomplish: privacy, security, keeping pets in, boosting curb appeal, or all of the above. We measure, check for any property line concerns, and go over material options that make sense for your budget and Florida’s climate.
Once you approve the plan and pricing, we handle the permit if your county requires one. Most areas around Edgewood do, and the process varies depending on where exactly you’re located. We take care of that so you don’t have to figure out the paperwork.
Then we install. Posts go in first, set in concrete and aligned properly. Panels or pickets come next, secured to handle wind load and daily wear. We clean up the site when we’re done, and you’re left with a fence that does its job without you thinking about it. That’s the goal.
Ready to get started?
You’re getting more than just a fence. You’re getting a full site assessment, material recommendations based on what actually works in Edgewood’s climate, and a crew that knows how to install it right.
We handle wood, vinyl, aluminum, chain link, horse fencing, and custom estate gates. Each material has pros and cons depending on what you need. Wood gives you that classic look but requires more maintenance. Vinyl holds up better in humidity and doesn’t need repainting. Aluminum works well for decorative fencing and pool enclosures. Chain link is the most cost-effective for large areas.
For residential fencing in Edgewood, FL, privacy fences are the most common request. People want to block sightlines from neighbors, reduce road noise, or create a contained play area. We install those at the height and style that works for your property, using materials rated to handle Florida’s weather without falling apart in three years. If you’re near the coast or in a high-wind zone, we make sure the installation meets the stricter wind load requirements. That’s not optional.
Most likely, yes. Orange County, where Edgewood is located, typically requires a permit for fence installation, and the requirements can vary depending on fence height, location on your property, and proximity to roads or easements.
The permit process involves submitting a site plan, proof of property ownership, and sometimes a survey if there’s any question about property lines. Permit fees in Florida generally run between $150 and $400, depending on the scope of work and local jurisdiction.
We handle the permit application as part of our service so you don’t have to navigate county offices or worry about missing a requirement. Skipping the permit might seem like a shortcut, but it can cause serious problems if you ever sell your home or if a neighbor files a complaint. It’s worth doing it right.
Vinyl and aluminum are your best bets if you want something that requires almost no maintenance and won’t rot, rust, or warp in Florida’s heat and humidity. Vinyl fences resist moisture, don’t need painting, and hold up well in storms if they’re installed correctly. Aluminum is lightweight, won’t corrode in salty air if you’re near the coast, and works well for decorative or pool fencing.
Wood fences look great and give you more customization options, but they require regular maintenance in Florida. You’ll need to stain or seal them every few years to prevent rot, especially with the amount of rain we get. Cedar and pressure-treated pine are the most common choices and handle moisture better than untreated wood.
Chain link is the most durable and cost-effective for large areas, though it doesn’t offer privacy unless you add slats. If you’re fencing a big yard or need something functional for pets, it’s a solid option. The key with any material is proper installation. Even the best materials fail if the posts aren’t set deep enough or the fence isn’t built to handle wind load.
It depends on the material, height, length, and site conditions. A basic chain link fence for a residential property might run $10 to $15 per linear foot. Wood privacy fencing typically falls between $15 and $30 per linear foot depending on the type of wood and fence height. Vinyl and aluminum cost more upfront, usually $20 to $40 per linear foot, but you save on maintenance over time.
If your yard has slopes, requires significant clearing, or needs corner bracing for wind resistance, that adds to the cost. Custom gates, decorative caps, and upgraded materials also increase the price.
We give you a transparent quote after walking your property so there are no surprises. You’ll know exactly what you’re paying for and why. Cheaper quotes usually mean lower-grade materials, shortcuts on installation, or unlicensed contractors who disappear when something goes wrong. You’re better off paying a fair price for work that lasts.
For a typical residential fence, installation usually takes one to three days depending on the length of the fence line, material type, and site conditions. A straightforward 150-foot privacy fence on flat ground with no obstacles can often be done in a day or two. Larger properties, sloped terrain, or custom work like estate gates take longer.
Permitting adds time before we start. If your county requires a permit, expect one to two weeks for approval, sometimes longer during busy seasons. We factor that into the timeline so you know what to expect upfront.
Weather can also delay things. We don’t set posts in heavy rain or when the ground is too saturated, because it affects how the concrete cures and how stable the fence will be long-term. We’d rather delay a day than install a fence that won’t hold up. Once we start, though, we work efficiently and clean up the site at the end of each day so your property isn’t torn up longer than necessary.
If it’s installed to Florida building code and built with wind load in mind, it has a much better chance. Most residential fences in Central Florida need to withstand at least 75 mph winds, and some areas closer to the coast require higher ratings. That means deeper post holes, concrete footings, proper bracing, and secure panel attachments.
Vinyl and aluminum fences handle high winds better than wood in most cases, especially if they have gaps or spacing that allows wind to pass through rather than hitting a solid wall. Solid privacy fences take more force, so the installation has to be even more precise. Posts need to be set at least two feet deep in concrete, and corner posts often need additional bracing.
No fence is completely hurricane-proof, but proper installation makes a huge difference. We’ve seen fences we installed years ago still standing after storms while others in the same neighborhood were flattened. The difference comes down to how it’s built. If you’re in a high-wind area or near the coast, we adjust the installation specs to meet those requirements. It’s not optional if you want the fence to last.
Yes, but you need to be sure about where that property line actually is. Most fence disputes happen because someone assumed the line was in one place and it turned out to be six inches or two feet different. If you don’t have a recent survey, it’s worth getting one before we install, especially if the neighbor has concerns.
Florida law doesn’t require you to get your neighbor’s permission to build a fence on your own property, but if the fence sits directly on the shared property line, it’s technically both of yours. That can get complicated if they want to split the cost or if they object to the style or height. Having a conversation before we start saves headaches later.
We’ve handled plenty of installs where neighbors share the fence and split the cost, and we’ve done just as many where the fence is set a few inches inside the property line to avoid any conflict. Either way works. The key is knowing exactly where your property ends so there’s no dispute after the fence is up. Once it’s installed, moving it is expensive and frustrating for everyone involved.
Local Resources
Other Services we provide in Edgewood
