Your fence should do more than mark property lines. It keeps your kids and pets safe while they’re outside. It stops neighbors from watching your every move. It makes your home look finished instead of half-done.
A good fence also means you’re not calling someone back in six months because boards are already splitting. You’re not repainting every year because the finish couldn’t handle Florida’s humidity. You’re not dealing with gates that sag or posts that lean after the first heavy rain.
When you work with a local fencing contractor in Lockhart, FL who knows what they’re doing, your fence becomes something you forget about in the best way possible. It just works. It looks clean. And when it’s time to sell, buyers notice that your yard is move-in ready.
We’ve been installing fences across Central Florida for over 30 years. We’re licensed, bonded, and insured, which matters more than most people realize until something goes wrong. We serve Lockhart, FL and the surrounding counties with the same crew that’s been with us for years.
We’re not the cheapest option, and that’s intentional. The companies that undercut everyone else are usually unlicensed, uninsured, or using materials that won’t survive a Florida summer. You’ll pay less up front and more later when you’re replacing the whole thing.
We’ve seen what happens when fences are installed without permits in HOA neighborhoods. We’ve repaired fences that weren’t built to handle wind load. We know which wood treatments actually prevent rot and which ones are just marketing. That’s the difference between someone who’s been here a few months and someone who’s been here a few decades.
First, we come out to your property and walk the area with you. We’ll talk about what you’re trying to accomplish, whether that’s privacy, security, keeping animals in or out, or just making the yard look better. We’ll also flag any potential issues like underground utilities, drainage problems, or HOA rules that could affect the project.
Next, we handle the permit process if your fence requires one. In Lockhart, FL and surrounding areas, permits are required for most fences over a certain height, and skipping this step can lead to fines or being forced to tear down the fence. We know what the local codes require and how to get approval without the runaround.
Once permits are cleared, we schedule the installation. Our crew shows up on time, marks everything out, and gets to work. We dig posts deep enough to handle Florida weather, use galvanized or stainless hardware that won’t rust out, and make sure gates actually swing the way they’re supposed to. When we’re done, we walk the fence line with you to make sure everything meets your expectations before we leave.
Ready to get started?
Every fence we install comes with materials chosen specifically for Central Florida’s climate. That means pressure-treated wood that resists rot, vinyl that won’t crack in the heat, or aluminum that can handle hurricane-force winds. We don’t use the cheapest option available because we don’t want to come back in a year to fix it.
You also get a crew that knows how to deal with Florida’s sandy soil, high water tables, and unpredictable weather. We set posts in concrete, not just dirt. We account for drainage so water doesn’t pool along your fence line. And we space everything correctly so your fence has room to expand and contract without buckling.
In Lockhart, FL, most of our residential fencing projects involve privacy fences for backyards, but we also install decorative aluminum for front yards, chain link for commercial properties, and custom gates for driveways. If you’re in an HOA community, we’ll make sure your fence meets their guidelines before we start. If you need a fence that keeps horses in or keeps wildlife out, we’ll build it to the right height and strength. Whatever you need, we’ve probably built it before.
Most residential fence installations take between one and three days depending on the size of your yard and the type of fence you’re installing. A simple chain link fence around a quarter-acre lot might be done in a day. A privacy fence with multiple gates and corner posts on a larger property could take closer to three days.
Weather can slow things down, especially during Florida’s rainy season. We don’t pour concrete in the rain because it won’t cure properly, and we don’t install vinyl in extreme heat because the panels can warp. If we have to pause for weather, we’ll let you know and reschedule as soon as conditions improve.
Permitting can add time to the overall timeline, but that happens before we start digging. If your city requires a permit, expect an extra week or two for approval. We handle that process for you, so you’re not stuck making calls to the building department.
It depends on the height and location of your fence. Most cities in Central Florida require permits for fences over four feet tall in the backyard or over three feet tall in the front yard. If your property is in an HOA, you’ll also need their approval before you apply for a city permit.
Skipping the permit process is a gamble that rarely pays off. If a neighbor complains or an inspector drives by, you could be fined and forced to remove the fence entirely. That means you’ve paid for materials and labor twice, and you still don’t have a fence.
We pull permits as part of our service because we know what the local codes require and how to get approval without delays. We’ll also check for underground utilities before we dig, which is required by law and prevents you from accidentally hitting a gas line or fiber optic cable.
Vinyl and aluminum are the most weather-resistant options for Florida. Vinyl won’t rot, rust, or need repainting, and it handles humidity without warping as long as it’s installed correctly. Aluminum is even stronger, especially if you’re in a hurricane zone, and it won’t corrode in salty air if you’re near the coast.
Wood fences can work in Florida, but only if you use pressure-treated lumber and apply a quality sealant every few years. Untreated wood will crack, warp, and rot in less than a year once the heat and humidity get to it. Cedar is naturally rot-resistant, but it’s more expensive and still needs maintenance.
Chain link is the most durable option if appearance isn’t your top priority. It won’t blow over in a storm, it doesn’t rot, and it requires almost no maintenance. For commercial properties or large yards where you just need a secure boundary, chain link makes sense. For privacy and curb appeal, vinyl or aluminum is the better choice.
Fence costs vary based on material, height, and the size of your property. Chain link is the least expensive, usually running between $10 and $15 per linear foot installed. Wood privacy fences cost between $15 and $30 per linear foot depending on the type of wood and the height. Vinyl and aluminum are more expensive up front, typically $25 to $50 per linear foot, but they last longer and require less maintenance.
If your yard has slopes, corners, or obstacles like trees and utility boxes, that can increase the cost because it takes more time and materials to work around them. Gates also add to the total, especially if you need a double gate for vehicle access.
We don’t give quotes over the phone because every property is different. We’ll come out, measure your yard, talk through your options, and give you a written estimate with no hidden fees. If you’re comparing bids, make sure you’re comparing the same materials and the same scope of work. The lowest bid usually means lower quality materials or corners being cut somewhere.
Yes, we handle fence repairs and partial replacements all the time. If a few boards are damaged or a gate is sagging, we can fix those sections without replacing the entire fence. If a storm knocked down part of your fence or a vehicle hit a section, we can rebuild just that area and match it to the rest of your fence as closely as possible.
Sometimes a repair doesn’t make sense. If your fence is more than 15 years old and multiple sections are failing, you’re better off replacing the whole thing. Repairing one section now means you’ll be repairing another section in six months, and the costs add up quickly.
We’ll be honest with you about whether a repair is worth it or if replacement is the smarter move. If your fence just needs a few new boards or a gate adjustment, we’ll tell you that. If the posts are rotting and the whole structure is compromised, we’ll tell you that too. Either way, you’ll know what you’re dealing with before we start any work.
Clear the area where the fence will go. Move any furniture, grills, toys, or planters that are in the way. If you have landscaping along the fence line, we can work around it, but it’s easier if plants and bushes are trimmed back. We’ll need access to the entire perimeter, so make sure gates are unlocked and any dogs are inside during the installation.
Mark any underground sprinkler lines or lighting cables if you know where they are. We’ll call 811 to mark utilities before we dig, but private lines like irrigation systems aren’t always included in that service. If we hit a sprinkler line, we can usually fix it, but it’s better to avoid it in the first place.
If you’re in an HOA, make sure you have written approval before we start. We can help you with the application, but the approval has to come from your HOA board. Starting without approval can result in fines and being forced to remove the fence, even if it’s already installed. It’s worth the extra week or two to get it done right.
Local Resources
Other Services we provide in Lockhart
